How to Automatically Make Solventless Isolate

Solventless isolate is a highly sought-after product by many cannabis enthusiasts. It is a form of concentrate that is made without the use of solvents like butane or CO2. Instead, it is made by pressing trichomes or rosin in a micron screen to separate the rosin from plant material. In this article, we will be discussing how to make solventless isolates using the NugSmasher IQ.

Step 1: Preparation

The first step in making solventless isolates is to prepare the rosin for pressing. Take the rosin and fold it into a brick to let it butter up. (this could take several hours to a day) It is best to get it to a size that can fit inside two 37-micron bags that will be used later. It is also essential to wrap it in a 25-micron screen before placing it inside the 37-micron bag. This micron screen can be purchased from NugSmasher or Amazon.

Step 2: Double-end in a 37-micron bag

After wrapping the rosin in the 25-micron sheet, double-end it in a 37-micron bag. This bag will hold the surface area size, and it is crucial to get the measurement to plug into the IQ. Folding it up is necessary, and the measurement is taken with a ruler to have the exact surface area size and input into the IQ Settings.

Step 3: Heat up the NugSmasher IQ

Heat up the NugSmasher IQ to the desired temperature. It is best to start at a low temperature and gradually increase it, typically isolations start at 100 degrees Fahrenheit. Once it reaches the desired temperature, place the bag with the wrapped rosin inside the IQ.

Step 4: Press the rosin

Press the rosin for 2-6 minutes. It is easiest for isolations to click on the ramp mode and then select the isolate or hash option. In this case, select the isolate option. This will automatically ramp up your temperature and your pressure over the course of the isolation duration which is imperative to executing an isolation properly. It is best to check it frequently, and the pressure can be adjusted as needed. Once the pressing time is up, remove the isolate from the IQ and let it cool.

Step 5: Collect the isolate

After the bag has cooled, it is time to collect the isolate. Carefully open and remove the bag and collect the isolate. Use a scraper or dab tool to collect the isolate from the bag.

Conclusion

Making solventless isolate using the NugSmasher IQ is a simple process that can be done with ease. With these easy-to-follow steps, anyone can create their own solventless isolate at home. Remember to be safe and cautious when handling hot equipment and always wear gloves. Enjoy your homemade solventless isolate!